FHM - Mixing Shunts



The prefabricated Danfoss floor heating mixing shunts are used for regulating the correct flow and supply temperature in hydronic floor heating systems.

The compact design and flexibility allows mount­ing the mixing shunt directly to the manifold, both on left and right side and primary pipe connection to the shunt from the side or below. A self-acting proportional regulator is used to regulate the supply temperature. The regulator ensures the correct mix so that the desired supply temperature to the underfloor heating system always remains constant, irrespective of load. A possible safety thermostat protects the floor against too high temperatures and the electronic variable speed pump is adjusting itself for correct flow in the cir­cuits. A standard 3-speed pump is also available. The built-in check valve ensures correct flow direction and it is prepared for both inserting thermometers and temperature sensors. An air-vent on top completes the mixing shunt.


FHM - Mixing Shunts

Tehnički podaci





Dokumentacija



10 Pronađena literatura: 3 katalog, 2 prospekt and 5 upute


Katalog
 
Designing hydronic floor heating - Get the optimum results
FHH_CFC_Application-guide_VKDYD302_lo-res.pdf (3,6 Mb), Literatura broj: VKDYD302, Jezik: engleski, Datum objave: 18/01 2017
 
Hydronic floor heating - Easy, proven and profitable
FHH_CFC_Product-guide_VKDYC202_lo-res.pdf (5,7 Mb), Literatura broj: VKDYC202, Jezik: engleski, Datum objave: 01/12 2015
 
Hydronic floor heating - Easy, proven and profitable
FHH_CFC_Product-guide_VKDYC302.pdf (12,4 Mb), Literatura broj: VKDYC302, Jezik: engleski, Datum objave: 19/05 2017
 


Prospekt
 
Compact mixing shunts (with FHF manifold)
MixingShunt_6pages_brochure_VBULP502_2013_low-res.pdf (1,5 Mb), Literatura broj: VBULP502, Jezik: engleski, Datum objave: 31/12 2012
 
Why choose floor heating? Comfort, a lower heating bill and much more...
FHH_CFC_End-user_VBDYC302_hi-res.pdf (10,8 Mb), Literatura broj: VBDYC302, Jezik: engleski, Datum objave: 12/07 2017
 


Upute
 
FHM-CN Mixing Shunt
FHM-CN X022225 VIIKA102.pdf (3,2 Mb), Literatura broj: VIIKA102, Jezik: engleski, Datum objave: 05/05 2015
 
FHM-CN1 Pre-assembled Mixing Shunt
FHM-CN1_VIIKC102.pdf (1,9 Mb), Literatura broj: VIIKC102, Jezik: engleski, Datum objave: 05/11 2015
 
FHM-CN1 Pre-assembled Mixing Shunt
FHM-CN1_VIIKC12P.pdf (4,0 Mb), Literatura broj: VIIKC12P, Jezik: (2P) GB,CN, Datum objave: 13/11 2015
 
FHM-CN2 Pre-assembled Mixing Shunt
FHM-CN2_VIIKD102.pdf (3,2 Mb), Literatura broj: VIIKD102, Jezik: engleski, Datum objave: 07/07 2016
 
FHM-Cx Mixing Shunts - Tighten after transport
FHM-Cx-tight_088R0245_VIIKB100.pdf (0,5 Mb), Literatura broj: VIIKB100, Jezik: Nema teksta, Datum objave: 23/09 2015